eSIM Setup
Step 1/1 – Install eSIM
- In the AllDay eSIM app, select your eSIM and display your QR code (you can share it with another device or print it if you wish).
- On your Android device, go to Settings > Network & Internet > Add Mobile Network (or Add eSIM).
- When asked “Don’t have a SIM card?”, select Next.
- Scan the QR code or select a saved QR code.
- Enter the confirmation code if required.
- Return to Mobile Network and turn on your eSIM.
- Enable mobile data.
- Turn on international roaming (turn off your primary line while abroad).
- If the APN is not detected automatically or there is no internet connection, enter wbdata or global in the APN field.
- Turn airplane mode on and off, then check your internet connection.
Step 1/3 – Install eSIM
- Open Settings > Cellular (or Mobile Data)
- Tap Add Cellular Plan (or Add eSIM)
- Tap Use QR Code
- Scan the QR code or select the saved QR code from Photos
- Tap Continue twice
- Wait a few minutes for the eSIM to activate, then tap Done
Step 2/3 – Install eSIM
- Choose a label for your eSIM (e.g. 'AllDay eSIM')
- Default Line Settings:
- For Calls and SMS: Select your primary line
- For iMessage and FaceTime: Select your primary line
- For Cellular/Mobile Data: Select your AllDay eSIM eSIM
- Allow Cellular Data Switching: Make sure it is OFF
- ⚠️ Note: If your eSIM supports data only, do not select it for calls or SMS.
Step 3/3 – Install eSIM
- Go to Settings > Cellular (or Mobile Data)
- Tap your eSIM plan
- If not active, turn on Turn On This Line
- Turn ON International Roaming (if required, follow the instructions in the AllDay eSIM app)
- Select the AllDay eSIM eSIM as your data line
- The eSIM will automatically connect to the supported mobile network
⚠️ APN Note (if the internet does not work on some devices)
- Some devices may not receive APN settings automatically.
- If the internet does not connect, enter the APN manually:
- APN: wbdata or globaldata
- All entries must be in lowercase
Step 1/1 – Install eSIM
- In the AllDay eSIM app, open the Manual Installation option.
- Copy the SM-DP+ Address and Activation Code (and the Confirmation Code if available).
- On your device, go to Settings > Network & Internet > Add Mobile Network (or Add eSIM).
- When asked “Don’t have a SIM card?”, select Next.
- Tap Enter code manually and enter the SM-DP+ Address and Activation Code from the AllDay eSIM app.
- Return to Mobile Network and turn on your eSIM.
- Enable mobile data.
- Turn on international roaming (turn off your primary line while abroad).
- If the APN is not detected automatically or there is no internet connection, enter wbdata or global in the APN field.
- Turn airplane mode on and off, then check your internet connection.
Step 1/3 – Install eSIM
- Open Settings > Cellular (or Mobile Data)
- Tap Add Cellular Plan (or Add eSIM)
- Use QR Code > Enter Details Manually
- Enter the SM-DP+ Address, Activation Code, and Confirmation Code (if available)
- Tap Next, then tap Continue twice
- Wait a few minutes for the eSIM to activate, then tap Done
Step 2/3 – Install eSIM
- Choose a label for your eSIM (e.g. 'AllDay eSIM')
- Default Line Settings:
- For Calls and SMS: Select your primary line
- For iMessage and FaceTime: Select your primary line
- For Cellular/Mobile Data: Select your AllDay eSIM eSIM
- Allow Cellular Data Switching: Make sure it is OFF
- ⚠️ Note: If your eSIM supports data only, do not select it for calls or SMS.
Step 3/3 – Install eSIM
- Open Settings > Cellular (or Mobile Data)
- Select your eSIM plan
- If not active, turn on Turn On This Line
- Turn ON International Roaming (if required, follow the instructions in the AllDay eSIM app)
- Select the AllDay eSIM eSIM as your data line
- Allow Cellular Data Switching: Make sure it is OFF
- The eSIM will automatically connect to the supported mobile network
⚠️ APN Note (if the internet does not work on some devices)
- Some devices may not receive APN settings automatically.
- If the internet does not connect, enter the APN manually:
- APN: wbdata or globaldata
- All entries must be in lowercase
